Headliner bulkhead trim
From £60.00
Elevate your camper’s interior with our custom Bulkhead Trim. This pre-scribed piece is designed to fit seamlessly beneath the headliner, concealing the area where the original bulkhead was removed. Designed to be upholstered in your choice of carpet, it provides that seamless, "factory-finished" look that separates a standard van from a professional conversion. Buy in conjunction with your headliner for a reduced price, simply select 'Yes' on Headliner bulkhead trim drop down.
-Professionally CNC cut from 12mm sustainably sourced ply
-Cut to size ready to fit
-Free nationwide delivery!
Additional information
| Hand Drive | Left, Right |
|---|---|
| Wheel Base | Long, Short |
| Roof Type | Pop Top, Standard |
| Trim Colour | Black, Grey, Silver |
| Unit Colour | Baby Blue, Black Gloss, Brushed Metal Dark, Brushed Metal Light, Cherry, Concrete, Cream Gloss, Dark Grey Gloss, Fjord Green, Hardwood Oak, Light Grey Gloss, Light oak, Marble Dark, Marble Light, Orange, Red, Stone, Terracotta, Turquoise Blue, Walnut, White Gloss, Yellow, Zebrano Dark, Zebrano Light |
| Worktop/Table Colour | Baby Blue, Black Sparkle, Solid Oak, White Gloss, Black Gloss, Brushed Metal Light, Brushed Metal Dark, Cherry, Concrete, Cream Gloss, Dark Grey Gloss, Fjord Green, Hardwood Oak, Light Grey Gloss, Light Oak, Marble Dark, Marble Light, Orange, Red, Stone, Terracotta, Turquoise Blue, Walnut, White Sparkle, Yellow, Zebrano Dark, Zebrano Light |
| Tambour Door Colour | Black, Silver |
| Handle Colour | Black, Chrome |
| Kickboards | Custom Size, Fabworx 112 tested, Metal 'N' Threads 3/4 tested, None, Rib Alter 3/4 112 Fixed, Rib Alter 3/4 112 Sliding, Rusty Lee 3/4 non tested, Rusty Lee 3/4 tested, Smart bed 3/4 Evo II tested |
| Under Worktop Unit | Dometic/SMEV FO211FGT Oven/Grill cut-out, Standard Door, Tambour Door |
| Rear Unit Bottom Door | Standard Door, Tambour Door |
| Sink/Grill Cut-out | Dometic Smev 9222 RHS, Dometic Smev 9722 RHS, None |
| Double Seat Panel | No, Yes |
| Single Seat Panel | No, One, Two |
| Assembly or Delivery | Flat Packed Collection, Flat Packed Delivered, Full Assembly (Collection Only) |
Fitting
Our full height ply lining panels are designed to sit outside the standard recess, they therefore are not fixed with clips, this does however offer a professional seamless camper van finish. Although a little trickier to fit, the full height offeres are far better finish. We have listed a few ways professionals ply line below. We recommend two people for all options
- Small black panhead screws-
Firstly, carpet the panels and the areas in which the panels will not cover, then simply screw them to the metal work using small black pan head screws. The screws are barely visible within the carpet and this option allows the removal on the panel if necessary. You may find it helps to pre-drill with a 2.5 metal bit. We recommend two people to carry out the fitting.
- Secret screw-
As before, carpet the panels and the areas in which the panels will not cover. Then make a small V shaped cut in the carpet with a sharp Stanley knife, as we only use 6mm you can then screw the panels with a small headed counter sunk screw, finally butt the carpet over the screw head for a seamless finish
- Carpet drop-
Firstly, screw all uncarpeted ply into position with counter sink screws, then carpet drop the full side of the van starting from the top. Individual doors will still require steps 1 or 2
Specification
VW T5/6
-Full height OS with window – Full height NS sliding door with window – Full height rear quarter – Full height barn doors with window – Full height tailgate with window
FTC 2014-2024
-Full height OS with window – Full height NS sliding door with window – Full height rear quarter – Full height barn doors with window – Lower tailgate
VW T7/ FTC 2024-present
Lower OS – Full height NS sliding door with window – Full height rear quarter – Full height barn doors with window or lower tailgate
89 in stock
