Ford Transit Custom Premium



Here at Coolwhip Campers we pride ourselves in the bespoke options which we can offer. See below the vast number of beautiful options you can choose from and visualise yourself with our state of the art software by clicking the button ‘Van Visualiser’.

If you already know what you want then select your options below.

For the best possible experience we recommend you use the ‘Van Visualiser’ tool on a desktop computer, tablet or laptop.

Our Ford Transit Custom kit has been designed and pre-scribed to fit perfectly flush, straight into your camper van, minimising work and saving a huge amount of time. With our clever integrated floor system, you can build your units in the comfort of a workshop or garage, click them into the rebated floor base, prewire and install any appliances, then with one lift the units can be fitted to the van. The beauty of our concept has changed the small van conversion concept all together, allowing you to remove the units if necessary. This kit will also fit the Twin sliding door variant, however will need some minor scribing adjustments when fitting

Click to see how easy fitting is here.

  • High pressure laminated birch
  • Solid oak work top and folding table
  • Real oak tambour door
  • Integrated floor system for simple installation
  • Soft close drawer
  • Soft close door hinges
  • Overhead LED top locker
  • Full size window surround splashback
  • Full LED shelving system throughout
  • Kickboards for Rock ‘N’ Roll Bed
  • Table with folding leg & rail
  • Table storage system
  • LED cubby hole
  • Worktop storage flap
  • Grill/sink cut outs with flush design
  • Chopping board
  • Personalised coasters
  • Easy to follow picture instructions

Overall length: 2241mm | Height 1322mm

Overall length 2511mm | Height 1322mm

Work top
Height: 760mm

Fridge Aperture
Width: 390mm | Height 536mm
Will accommodate most popular campervan 12v fridges

Rock & Roll bed
Suitable for beds 112cm or smaller

Van floor 

Must have an overall thickness no greater than 16mm from the ribs (see shop)


Must have our Two-piece ply-ling on O/S with full height rear quarter panel (see shop)

  • SWB includes 2 x doors in top locker
  • LWB includes 3 x doors in top locker
  • We constantly strive to improve our products, therefore pictures may differ slightly from current design
  • This kit contains a separate splash back, control panel box (needs scribing) and a hanging top locker
Bespoke +£195.00 White Gloss £0.00 Cream Gloss £0.00 Light grey gloss £0.00 Dark Grey Gloss £0.00 Black Gloss £0.00 Yellow £0.00 Orange £0.00 Red £0.00 Terracotta £0.00 Baby Blue £0.00 Turquoise blue £0.00 Fjord green £0.00 Light oak £0.00 Cherry £0.00 Hardwood Oak £0.00 Walnut £0.00 Zebrano light £0.00 Zebrano Dark £0.00 Concrete £0.00 Stone £0.00 Light Marble £0.00 Dark Marble £0.00 Brushed Metal Light £0.00 Brushed Metal Dark £0.00

Please enter Altofina colour and code (Plain colour, wood and stone only. Any other POA)
See ‘Our Range’ page

*Please note we are unable to cut doors into Custom size Kickboards, simply length x width

For full assembly and fitting your van must comply with the following:

-Van must be empty
-Van floor must have an overall thickness no greater than 16mm from the ribs
-Van must have our Two-piece ply-ling on O/S with full height rear quarter (See shop)